Vi har tekniska problem. Din formulär har inte varit framgångsrik. Vi ber om ursäkt och försök igen senare.

get direct access

Fill in your details below and get direct access to content on this page

Vi har tekniska problem. Din formulär har inte varit framgångsrik. Vi ber om ursäkt och försök igen senare.

F3S-TGR-S_A/-S_D

Standalone non-contact door switch

Standalone non-contact switches support applications like guarding doors or position monitoring in machines. They are using the proven Omron non-contact technology allowing to cover mechanical tolerances and vibrations.

Models with single or dual actuator available
Based on hall technology
Connect up to 20 switches in series
LED for easy diagnosis
Operates behind stainless steel fittings
Non-contact – no abrasion – no particles
Compensation of mechanical tolerances
Suitable for high pressure cleaning, CIP and SIP processes due IP69K (pre-wired types)
Conforms to safety categories up to PLe acc. EN ISO 13849-1

Compare all models CAD-bibliotek

Specifications & ordering info

Ordering information

Switches

Polyester housing

Type	Cable connection	Order code
Single actuator sensing	5 m pre-wired	F3S-TGR-SPSA-05
	10 m pre-wired	F3S-TGR-SPSA-10
	M12, 8-pin	F3S-TGR-SPSA-M1J8
Dual actuator sensing	5 m pre-wired	F3S-TGR-SPSD-05
	10 m pre-wired	F3S-TGR-SPSD-10
	M12, 8-pin	F3S-TGR-SPSD-M1J8

Stainless steel housing

Type	Cable connection	Order code
Single actuator sensing	5 m pre-wired	F3S-TGR-SMSA-05
	10 m pre-wired	F3S-TGR-SMSA-10
	M12, 8-pin	F3S-TGR-SMSA-M1J8
Dual actuator sensing	5 m pre-wired	F3S-TGR-SMSD-05
	10 m pre-wired	F3S-TGR-SMSD-10
	M12, 8-pin	F3S-TGR-SMSD-M1J8

Accessories

		Order code
Cables 8-pin	2 m	Y92E-M12PURSH8S2M-L
	5 m	Y92E-M12PURSH8S5M-L
	10 m	Y92E-M12PURSH8S10M-L
	25 m	Y92E-M12PURSH8S25M-L
Actuators (only for master coded types)	for F3S-TGR-SPSA and -SPSD	F39-TGR-SPS-A
Actuators (only for master coded types)	for F3S-TGR-SMSA and -SMSD	F39-TGR-SMS-A
Mounting screws	Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl. washers and Torx bit)	F39-TGR-N-SCREWS

Specifications

Mechanical data

Item	Model	Polyester Sensor	Stainless steel sensor
Indicator	-	Green LED: Indication of safety circuits closed (Guard closed, actuator present, feedback circuit checked)
Indicator	-	Yellow LED: Indication of safety circuits open (Actuator removed)
Operating distance	OFF  ON (Sao)	10 mm Close
Operating distance	ON  OFF (Sar)	15 mm Open
Actuator approach speed	Min.	4 mm/s
Actuator approach speed	Max.	1,000 mm/s
Operating temperature		-25 to 45°C
Enclosure protection	Flying lead	IP69K
Enclosure protection	M12 connector	IP67
Material cable	Flying lead	PVC, Ø 6 mm o.d.
Material cable	M12 connector	250 mm, PVC, Ø 6 mm o.d.
Material housing		UL approved Polyester	Stainless steel 316

Electrical data

Item		Model	Polyester sensor
Sensing technology		-	Hall
Serial connection		-	up to 20 switches
Power supply			24 VDC±10%
Power consumption		Max.	0.1 A
Switching current		Min.	10 mA, 5 VDC
Rated loads	Safety outputs	Max.	3 A, 250 VAC/3A, 24 VDC
Rated loads	Auxiliary output	Max.	0.2 A, 24 VDC

Approved standards

EN standards certified by TÜV Rheinland
EN ISO13849-1
EN 62061
EN ISO 14119
EN 60204-1
EN/IEC 60947-5-3
UL 508, CSA C22.2
BS 5304
EN 1088-1 conformance

Wiring example (serial connection with manual restart)

(up to PLe acc. EN ISO 13849-1)

Safety Circuit 1 (Black/White) utilises internally checked force guided relay contacts and is connected in series with the corresponding Safety Circuit 2 (Yellow/Green) of the next switch. Allows minimal wiring and higher current switching to K1 and K2 contactors.

A manual start and contactor feedback check is achieved by connecting K1(Aux) and K2(Aux) feedback contacts and momentary start button through the orange and brown feedback check.