Vi har tekniska problem. Din formulär har inte varit framgångsrik. Vi ber om ursäkt och försök igen senare.

get direct access

Fill in your details below and get direct access to content on this page

Vi har tekniska problem. Din formulär har inte varit framgångsrik. Vi ber om ursäkt och försök igen senare.

NX-MD6121-6

16 Digital Inputs + 16 Digital NPN Outputs, Standard speed, 24 VDC, 2 x FCN24 connectors (not included), 30 mm wide

enPDF 4,49 MB

Specifications

I/O system	NX I/O Bus
Type of module	Digital I/O
Number of digital inputs	16
Digital input type	PNP/NPN
Permitted voltage at input	15-28.8 V
OFF/ON delay	0.02-0.4 ms
Number of digital outputs	16
Digital output type	NPN
Permitted voltage at output	10.2-28.8 V
Output current	0.5 A
Short-circuit protected outputs
Connection method	1-wire
Signal processing	Free running, Standard speed, Synchronous
IO-Link master
I/O connection type	FCN (plug not included)
Number of I/O connectors	2
Detachable I/O connector
Suitable for safety functions
SIL according to IEC 61508	None
Communication port(s)	None
Number of IOV (V+) terminals	2
Number of IOG (V-) terminals	2
Number of COM terminals	2
Degree of protection (IP)	IP20
Product Height (unpacked)	100 mm
Product Width (unpacked)	30 mm
Product Depth (unpacked)	72.5 mm
Product Weight (unpacked)	150 g

	G70A-ZOC16-3 DC24	Output Terminal Block for Relay or SSR, 16-point, for NPN output units
	G70V-SID16P	Relay terminal, PLC Input, 16 channels, NPN, Push-in terminals
	G70V-SID16P-1	Relay terminal, PLC Input, 16 channels, PNP, Push-in terminals
	XW2D-20G6	General-purpose I/O terminal block, MIL20 socket, M3 captive screws, 20 points
	XW2K-20G-O16A-IN	PLC interface wiring system with push-in plus technology and power supply terminal, 20 points MIL connector, Input, Signal: 0.5 A, Power: 4 A, NPN, 30 VDC, DIN rail horizontal and vertical mounting
	XW2K-20G-O16B-OUT	PLC interface wiring system with push-in plus technology and power supply terminal, 20 points MIL connector, Output, Signal: 0.5 A, Power: 4 A, NPN, 30 VDC, DIN rail horizontal and vertical mounting
	XW2K-20G-T	General purpose interface wiring system with push-in plus technology, 20 points MIL connector, Input/Output, 1 A, NPN/PNP, 125 VAC, 30 VDC, DIN rail horizontal and vertical mounting
	XW2Z-0100AD-L	I/O connection cable, unshielded, FCN24 to MIL20, 1 m
	XW2Z-0100AL-L	I/O connection cable, unshielded, FCN24 to open ends, 1 m
	XW2Z-0200AD-L	I/O connection cable, unshielded, FCN24 to MIL20, 2 m
	XW2Z-100A	I/O connection cable, FCN24 to MIL20, 1 m
	XW2Z-200A	I/O connection cable, FCN24 to MIL20, 2 m
	XW2Z-R100C	I/O connection cable, with shield connection, FCN24 to MIL20 for G70A-ZOC16-3 / G70A-ZIM16-5, 1 m
	XW2Z-R200C	I/O connection cable, with shield connection, FCN24 to MIL20 for G70A-ZOC16-3 / G70A-ZIM16-5, 2 m