ZX-E

ZX-E Smart Sensors (Inductive Displacement Type) Datablad

Smart induktiv givare

ZX-E är den bästa lösningen för exakta mätningar av metallobjekt. Den rekommenderas starkt i tuffa miljöer till exempel inom bil- och verkstadsbranschen.

Hög upplösning på 1 µm
Kort svarstid på 150 µs
Enkelt att byta givarhuvud
Moduluppbyggd plattform för olika givartekniker
Enkel linjäritetsinställning för alla metaller

Tekniska data

Ordering information

Sensors

Sensor heads

Shape	Dimensions	Sensing distance	Resolution1	Order code
Cylindrical	3 dia. × 18 mm	0.5 mm	1 μm	ZX-EDR5T
	5.4 dia. × 18 mm	1 mm		ZX-ED01T2
	8 dia. × 22 mm	2 mm		ZX-ED02T2
Screw-shaped	M10×22 mm	2 mm		ZX-EM02T2
Screw-shaped	M18×46.3 mm	7 mm		ZX-EM07MT2
Flat	30×14×4.8 mm	4 mm		ZX-EV04T2 , 3
Heat-resistant, cylindrical	M12×22 mm	2 mm		ZX-EM02HT4

Amplifier units

Power supply	Output type	Order code
DC	NPN	ZX-EDA11
DC	PNP	ZX-EDA41

Note: Compatible connection with the sensor head.

Accessories (order separately)

Calculating unit

	Model
Calculating unit	ZX-CAL2

Amplifier mounting brackets

Remarks	Model
Attached to each sensor head	ZX-XBE1
For DIN track mounting	ZX-XBE2

SmartMonitor sensor setup tool for Personal Computer connection

Name	Model
ZX-series communications interface unit	ZX-SF11
ZX-series communications interface unit + setup software (CD-ROM)	ZX-SFW11EV35
ZX-series sensor setup and logging software (CD-ROM)	ZX-SW11EV3

Name

Model

ZX-series communications interface unit

ZX-SF11

ZX-series communications interface unit

+ setup software (CD-ROM)

ZX-SFW11EV35

ZX-series sensor setup and logging software (CD-ROM)

ZX-SW11EV3

Cables with connectors on both ends (for extension)*

Cable length	Model
1 m	ZX-XC1A
4 m	ZX-XC4A
8 m	ZX-XC8A

* Robot cable models are also available. The model numbers are ZX-XC_R.

Specifications

Sensor heads

Item			ZX-EDR5T	ZX-ED01T	ZX-ED02T/EM02T	ZX-EM07MT	ZX-EV04T	ZX-EM02HT
Measurement range			0 to 0.5 mm	0 to 1 mm	0 to 2 mm	0 to 7 mm	0 to 4 mm	0 to 2 mm
Sensing object			Magnetic metals (Measurement ranges and linearities are different for non-magnetic metals. Refer to engineering data on B-67.)
Standard reference object			18 × 18 × 3 mm		30 × 30 × 3 mm	60 × 60 × 3 mm		45 × 45 × 3 mm
Standard reference object			Material: Ferrous (S50C)
Resolution6			1 µm
Linearity7			±0.5% F.S.					±1% F.S.8
Linear output range			Same as measurement range.
Temperature characteristic9 (including amplifier unit)			0.15 % F.S./°C	0.07% F.S./°C				0.1% F.S./°C
Ambient temperature	Operating10		0 to 50°C (with no icing or condensation)	-10 to 60°C (with no icing or condensation)				-10 to 200°C
Ambient temperature	Storage5		0 to 50°C (with no icing or condensation)	-20 to 70°C (with no icing or condensation)				-20 to 200°C
Ambient humidity			Operating and storage: 35% to 85% (with no condensation)
Insulation resistance			50 MΩ min. (at 500 DC)
Dielectric strength			1,000 VAC, 50/60 Hz for 1 min between charged parts and case
Vibration resistance (destruction)			10 to 55 Hz with 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance (destruction)			500 m/s2, 3 times each in X, Y, and Z directions
Degree of protection (sensor head)			IEC60529, IP65	IEC60529, IP67				IEC60529, IP6011
Connection method			Connector relay (standard cable length: 2 m)
Weight (packed state)			Approx. 120 g	Approx. 140 g		Approx. 160 g	Approx. 130 g	Approx. 160 g
Materials	Sensor head	Case	Brass	Stainless steel	Brass		Zinc (nickel-plated)	Brass
	Sensor head	Sensing surface	Heat-resistant ABS					PEEK
	Preamplifier		PES
Accessories			Amplifier mounting brackets (ZX-XBE1), instruction manual

Amplifier units

Item	ZX-EDA11	ZX-EDA41
Measurement period	150 µs
Possible average count settings12	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096
Linear output13	Current output: 4 to 20 mA/F.S., max. load resistance: 300 Ω Voltage output: ±4 V (±5 V, 1 to 5 V 14), output impedance: 100 Ω
Judgement outputs (3 outputs: HIGH/PASS/LOW)	NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max.	PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max.
Zero reset input, timing input, reset input, judgement output hold input	ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.)	ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.)
Function	Measurement value display set value/output value/ resolution display Linearity adjustment (materials selection) Scaling Display reverse display OFF mode ECO mode Number of display digit changes sample hold peak hold Bottom hold, peak-to-peak hold self-peak hold self-bottom hold Average hold delay hold zero reset Initial reset linearity initialization ON-delay timer OFF-delay timer one-shot timer previous value comparison Non-measurement setting direct threshold value setting position teaching Automatic teaching hysteresis width setting timing inputs Reset input judgement output hold input monitor focus Linear output correction (A-B) calculations4 (A+B) calculations15 K-(A+B) calculation4 mutual interference prevention4 Sensor disconnection detection zero reset memory zero reset indicator Key lock
Indications	Judgement indicators: High (orange), pass (green), low (yellow), 7-segment main digital display (red), 7-segment sub-digital display (yellow), power ON (green), zero reset (green), enable (green)
Voltage influence (including sensor)	0.5% F.S. of linear output value at ±20% of power supply voltage
Power supply voltage	12 to 24 VDC ± 10%, ripple (p-p): 10% max.
Current consumption	140 mA max. with power supply voltage of 24 VDC (with sensor connected)
Ambient temperature	Operating and storage: 0 to 50°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 DC)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz with 0.7-mm double amplitude for 80 min each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2, 3 times each in 6 directions (up, down, left, right, forward, backward)
Connection method	Prewired (standard cable length: 2 m)
Weight (packed state)	Approx. 350 g
Materials	Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Accessories	Instruction manual

1. For an average count of 4,096.

2. Models with protective spiral tubes are also available. Add a suffix of “-S” to the above model numbers when ordering. (Example: ZX-ED01T-S)

3. Be sure to use ZX-EDA amplifier unit version 1,200 or later with the ZX-EV04.

4. Be sure to use ZX-EDA amplifier unit version 1,300 or later with the ZX-EM02H.

5. The ZX-SFW11EV3 SmartMonitor can be used only to set functions and monitor waveforms.

6. Accuracy: The resolution is the deviation ( ±3 σ) in the linear output when connected to the ZX-EDA amplifier unit. The above values indicate the deviations observed 30 minutes after the power is turned ON.
(The resolution is measured with Omron's standard reference object at ½ of the measurement range with the ZX-EDA set for the maximum average count of 4,096 per period.)
The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields.

7. Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured.

8. The value given is for an ambient temperature of 25°C.

9. Temperature characteristic: The temperature characteristic is measured with Omron's standard reference object at ½ of the measurement range.

10. The ambient temperature given is only for the sensor head. It is -10 to 60°C for the preamp.

11. Do not use in moist environments because the case is not waterproof.

12. The response speed of the linear output is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).
The response speed of the judgement outputs is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).

13. The output can be switched between a current output and voltage output using a switch on the bottom of the amplifier unit.

14. Setting is possible via the monitor focus function.

15. A calculating unit (ZX-CAL or ZX-CAL2) is required.

1. For an average count of 4,096.

2. Models with protective spiral tubes are also available. Add a suffix of “-S” to the above model numbers when ordering. (Example: ZX-ED01T-S)

3. Be sure to use ZX-EDA amplifier unit version 1,200 or later with the ZX-EV04.

4. Be sure to use ZX-EDA amplifier unit version 1,300 or later with the ZX-EM02H.

5. The ZX-SFW11EV3 SmartMonitor can be used only to set functions and monitor waveforms.

8. The value given is for an ambient temperature of 25°C.

9. Temperature characteristic: The temperature characteristic is measured with Omron's standard reference object at ½ of the measurement range.

10. The ambient temperature given is only for the sensor head. It is -10 to 60°C for the preamp.

11. Do not use in moist environments because the case is not waterproof.

13. The output can be switched between a current output and voltage output using a switch on the bottom of the amplifier unit.

14. Setting is possible via the monitor focus function.

15. A calculating unit (ZX-CAL or ZX-CAL2) is required.

Nedladdning

Broschyrer

Measurement Sensors Broschyr

svPDF 1 MB

Fler språk

ZX-E series Broschyr

svPDF 600 KB

Fler språk

Visa alla broschyrer

Datablad

ZX-E Smart Sensors (Inductive Displacement Type) Datablad

svPDF 400 KB

Fler språk

Visa alla datablad

Manualer

ZX-E Driftmanual

enPDF 3 MB

Fler språk

Visa alla manualer

Vill du fråga om något?

Vi hjälper dig!

Kontakta oss

Prenumerera på produktuppdateringar

Nyhetsbrev om produktinnovationer, system och tjänster, direkt till din inkorg.

Tack för att du väljer att prenumerare på eNews. Du kommer inom kort att få ett e-postmeddelande från oss med en länk för att aktivera din prenumeration.

Vi har tekniska problem. Din formulär har inte varit framgångsrik. Vi ber om ursäkt och försök igen senare.

Download

Produktdokumentation

Hämta datablad, handböcker och broschyrer.

Sök i hämtningscentret

Kurser

Utbilda dig hos våra bästa tekniker. Från nybörjarnivå till avancerad nivå.

Visa kurser

Vi använder cookiefiler för att ge dig bästa möjliga upplevelse på vår webbplats.

Logga in

Registrera

Tack för att du registrerar dig hos Omron!

få direkt tillgång

Tack för visat intresse!

Country Selector

ZX-E

Smart induktiv givare

Ordering information

Sensors

Sensor heads

Amplifier units

Accessories (order separately)

Calculating unit

Amplifier mounting brackets

SmartMonitor sensor setup tool for Personal Computer connection

Cables with connectors on both ends (for extension)*

Specifications

Sensor heads

Amplifier units

Broschyrer

Measurement Sensors Broschyr

ZX-E series Broschyr

Datablad

ZX-E Smart Sensors (Inductive Displacement Type) Datablad

Manualer

ZX-E Driftmanual

Vill du fråga om något?

Prenumerera på produktuppdateringar

Produktdokumentation

Kurser

Vi använder cookiefiler för att ge dig bästa möjliga upplevelse på vår webbplats.

Inställningar för cookiefiler

Logga in

Registrera

Tack för att du registrerar dig hos Omron!

få direkt tillgång

Tack för visat intresse!

Did you know that 4 out of 5 distributors buy this product in a bundle?

Smart induktiv givare

Ordering information

Sensors

Sensor heads

Amplifier units

Accessories (order separately)

Calculating unit

Amplifier mounting brackets

SmartMonitor sensor setup tool for Personal Computer connection

Cables with connectors on both ends (for extension)*

Specifications

Sensor heads

Amplifier units

Broschyrer

Datablad

Manualer